VHT Nite Shades

How to Apply:

Clean surface with a window or glass cleaner. Shake can for one minute after the ball in the can begins to rattle. Agitate can well. Shake for one minute after marble is heard. Hold can 12 inches away from the lens. Apply in a crosshatch motion, be sure to spray past the lens so that the corners and ends are evenly covered. Apply subsequent coats approximately 10 minutes apart, usually two or three coats will achieve desired look. VHT NITE SHADES should be dry to the touch in about an hour and completely dry overnight. Do not reinstall until coating is completely dry. Apply VHT NITE SHADES to the outside of the lens cover only. Remove lens cover from the vehicle before applying. VHT NITE SHADES is a transparent coating, apply in smooth, even strokes approximately 3 minutes apart. Apply thin coats until a desired darkness is achieved usually two or three coats is sufficient.

FAQ:

Q: My Nite Shades is not adhering or looks milky white, Why?

A: Lens are made in a mold that is coated with mold release, the mold release needs to be removed prior to painting with lacquer thinner.

Q: How do I remove VHT Nite Shades Lens Tint?

A: Usually a little lacquer thinner on a clean lint free cloth will take it off. If the tint is more than 3 months old, it may be baked into the surface and normally will not come off.