VHT Polyurethane Wheel Paints

1. Use VHT Aggressive Strip Fast Paint Remover (SP-575) to remove all dirt, rust, scale and paint. This can also be accomplished by sand blasting. Finally, clean with non-residue solvent (VHT SP-11) and allow to dry before spraying.

2. Mask areas not to be sprayed. Also protect surrounding area from overspray.

3. For best results, apply when parts, can, and ambient temperature is between 70F (21C) and 90F (35C).

4. For maximum adhesion and color consistency, we recommend applying VHT Prime Coat Sandable Primer (SP-301 thru SP-306) within 24 hours of exposing bare metal.

5. Shake can vigorously for one minute after mixing ball rattles. Shake periodically between coats.

6. Spray object with can upright about 12-16 inches from the object. Apply thin, even coats in 20 minute intervals. Dries to the touch in 30 minutes, thoroughly overnight.

7. Clear out sprayer after each use by turning can upside down and pressing spray button until no paint comes out.

8. If clogging develops, remove spray button with a twisting motion and clean. Do not stick pin or other objects in to can. Gently replace spray button with a twisting motion while top of can and spray button opening are pointing away from you.

9. Do not wax or polish newly painted surfaces for a minimum of 90 days.