VHT Quick Coat Acrylic Enamels

1. Clean surface to remove rust, wax, grease and dirt. lightly sand gloss surface.

2. Mask areas not to be painted, and cover surrounding areas to protect them from overspray.

3. Spray at room temperature in area with adequate ventilation. DO NOT APPLY AT TEMPERATURES BELOW 70F (21C).

4. SHAKE CAN WELL for one minute after ball rattles. Repeat this procedure occasionally during the application.

5.Test a small area before spraying to insure compatibility.

6. Hold can upright 12 to 16 inches away from surface being sprayed. APPLY THIN EVEN COATS AT 20 MINUTE INTERVALS.

7. If clogging develops, remove spray button with a twisting motion and clean. DO NOT stick pin or other objects into can. Gently replace spray button with a twisting motion with top of can and spray button opening pointing away from you.

8. Clean spray button immediately after use by turning can upside down and pressing spray button until no paint comes out.

9. Dries in 20 minutes, cures overnight.