VHT Roll Bar & Chassis Paint

1. Remove grease, oil, loose paint, rust, etc. Sand previously painted surfaces lightly, then clean with high grade solvent such as VHT Brake Cleaner & Degreaser (SP-11).

2. Mask areas not to be sprayed. Also protect surrounding areas from overspray.

3. For best results, apply when, surface, can and ambient temperature is between 70-95F (21-35C).

4. Shake can vigorously for one minute after mixing ball rattles. Shake between coats.

5. Hold can upright 12 to 16 inches (30-40 cm) from surface during application. Apply thin, even coats in 20 minute intervals. Dries to the touch in 30 minutes, thoroughly dries overnight.

6. Clean spray button immediately after use by tuning can upside down and pressing spray button until no paint comes out.

7. Do not wax or polish newly painted surface for a minimum of 90 days.